Sandalye , arkalık ve oturak olmak üzere iki temel bileşenin metal bir iskelete monte edilmesi ile üretilmiştir. Temel olarak psikolojik ve fizyolojik parametreler göz önüne alınarak dizayn edilen sandalyemiz dünya standartlarındadır.

Sırtlık ve oturak şeffaf lake ile cilalanan suntalamdan elde edilir. 25x25 mm ölçülerinde olan metal profil polymerik kaplama ile gri renk boyanarak iskelet elde edilir.

Yüksekliği 2,3,4,5,6,7 sınıflara uygundur (6 standart boy)

Ağırlık: 4.0 kg

Sandalye , sırtlık ve oturak olmak üzere iki temel bileşenin metal bir iskelete monte edilmesi ile üretilmiştir. Temel olarak psikolojik ve fizyolojik parametreler göz önüne alınarak dizayn edilen sandalyemiz dünya standartlarındadır.

Arkalık ve oturak şeffaf lake ile cilalanan suntalamdan elde edilir. 25x25 mm ölçülerinde olan metal profil polymerik kaplama ile gri renk boyanarak iskelet elde edilir.

Yüksekliği ilk okul ve orta öğrenim öğrencilerine uygun olarak ayarlanabilir.

Ağırlık: 4.3 kg

Öğrenci sırası bir yatay ve dikey olmak üzere iki tablanın metal konstrüksiyon üzerine montel edilmesi ile elde edilir. Ayrıca metal konstrüksiyon çanta asmak için kanca içerir.

Üst tabla suntalam (renk - açık kayın) , 2 mm PVC kenarlık ile üretilir. Ön tabla ise yine suntalam (renk- açık kayın) 0,3 mm melamin kenarlık şeklinde üretilir.

25x25 mm profil polymeric kaplama sonrasında gri renkli olarak temel konstrüksiyonu oluşturur.

1200*500 mm ölçülerine sahip olan sıramız 2,3,4,5,6,7 sınıflara uygundur ( 6 standart boy)

Ağırlık: 13.8 kg

Öğrenci sırası bir yatay ve dikey olmak üzere iki tablanın metal konstrüksiyon üzerine montel edilmesi ile elde edilir. Ayrıca metal konstrüksiyon çanta asmak için kanca içerir.

Üst tabla suntalam (renk - açık kayın) , 2 mm PVC kenarlık ile üretilir. Ön tabla ise yine suntalam (renk- açık kayın) 0,3 mm melamin kenarlık şeklinde üretilir.

25x25 mm profil polymeric kaplama sonrasında gri renkli olarak temel konstrüksiyonu oluşturur.

1200*500 mm ölçülerine sahip olan sıramız 2,3,4,5,6,7 sınıflara uygundur ( 6 standart boy)

Ağırlık: 13.8 kg

The table is with variable parameters for three height groups. The table has two lateral metal supports to which the horizontal table top and the vertical board (the element of rigidity) are fastened. The supports have variable vertical sizes. A hook for a bag or a briefcase fastens to every support.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm and 20*20 mm (in the places of adjustment) with polymeric covering of grey color.

Sizes: 1200*500 mm, the height is adjusted according to 1-3 and 3-5 groups of height (for primary classes) or to 5-7 groups of height (for averages and the senior classes).

Ağırlık: 14.4 kg

The table is with variable parameters for three height groups. The table has two lateral metal supports to which the horizontal table top and the vertical board (the element of rigidity) are fastened. The supports have variable vertical sizes. A hook for a bag or a briefcase fastens to every support.

Material of the top: postforming – shipboard coated with plastic (the color – beech), with wrapped edges along the length of the top, 2 mm PVC edging along the width of the top.

Material of the front board: laminated chipboard (the color – beech), melamine edge 0,3 mm.

Material of the supports: metal pipe of square cross-section 25*25 mm and 20*20 mm (in the places of adjustment) with polymeric covering of grey color.

Sizes: 1200*500 mm, the height is adjusted according to 1-3 and 3-5 groups of height (for primary classes) or to 5-7 groups of height (for averages and the senior classes).

Ağırlık: 14.4 kg

The table is with constant parameters. It has two lateral metal supports to which a horizontal top and a vertical front board (the element of rigidity) are fastened. A hook for a bag or a briefcase fastens to a support.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm with polymeric covering of grey color.

Sizes: 600*500 mm, the height according to 2, 3, 4, 5, 6 groups of height (5 standard sizes).

Ağırlık: 8.6 kg

The table is with constant parameters. It has two lateral metal supports to which a horizontal top and a vertical front board (the element of rigidity) are fastened. A hook for a bag or a briefcase fastens to a support.

Material of the top: postforming – shipboard coated with plastic (the color – beech), with wrapped edges along the length of the top, 2 mm PVC edging along the width of the top.

Material of the front board: laminated chipboard (the color – beech), melamine edge 0,3 mm.

Material of the supports: metal pipe of square cross-section 25*25 mm with polymeric covering of grey color.

Sizes: 600*500 mm, the height according to 2, 3, 4, 5, 6 groups of height (5 standard sizes).

Ağırlık: 8.6 kg

Bu öğrenci sırası 3 farklı boy ortalamasına sahip olan öğrencilerin kullanımına uygundur. Metal iskelet üzerine üst ve ön tablanın monte edilmesiyle elde edilir. Ayrıca metal konstrüsiyon çanta asmaya uygun kanca içerir.

Üst Tabla: Suntalam (renk-açık kayın), 2 mm PVC kenarlık

Ön Tabla: Suntalam ( renk-açık kayın) 0,3 mm melamin kenarlık

Metal Konstrüksiyon: 25*25 mm ve 20*20 (iç profil) profilin polymerik kaplama ile gri renge boyanması ile elde edilir.

Ölçüler: 600mm*500 mm yüksekliği ise ilk okul ve orta öğrenim öğrencilerinin boy ortalamasına göre ayarlanabilir.

Ağırlık: 9.1 kg

Bu öğrenci sırası , 3 farklı boy ortalamasına sahip öğrencilerin kullanımına uygundur. Metal iskelet üzerine üst ve ön tablaların monte edilmesiyle elde edilmiştir. Ayrıca metal iskelet çanta asmaya uygun kanca içerir.

Üst Tabla: Plastik kaplı suntalam (renk - açık kayın) 2mm PVC kenarlık

Ön Tabla: Suntalam (renk - açık kayın) 0,3 mm melamin kenarlık

Metal Konstrüksiyon: 25*25 mm ve 20*20 (iç profil) profilin polymerik kaplama ile gri renge boyanması ile elde edilir.

Ölçüler: 600*500 mm ayarlanabilir yüksekliği ile ilk okul ve orta öğrenim öğrencilerinin kullanıma uygundur.

Ağırlık: 9.1 kg

The table is with constant parameters. It has two lateral metal supports to which a horizontal top and a vertical front board (the element of rigidity) are fastened. The kit includes two hooks for hanging a bag or a briefcase that fastens to every support, and two trays for writing supplies. Table has the function of manual installation of the top at an angle of 8°

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm with polymeric covering of grey color.

Sizes: 1200*500 mm, the height according to 2, 3, 4, 5, 6, 7 groups of height (6 standard sizes)

Ağırlık: 16.8 kg

The table is with variable parameters for three height groups. The table has two lateral metal supports to which the horizontal table top and the vertical board (the element of rigidity) are fastened. The supports have variable vertical sizes. The kit includes two hooks for hanging a bag or a briefcase that fastens to every support, and two trays for writing supplies.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm and 20*20 mm (in the places of adjustment) with polymeric covering of grey color.

Sizes: 1200*500 mm, the height is adjusted according to 1-3 and 3-5 groups of height (for primary classes) or to 5-7 groups of height (for averages and the senior classes).

Ağırlık: 17.2 kg

The table is with constant parameters. It has two lateral metal supports to which a horizontal top and a vertical front board (the element of rigidity) are fastened. The kit includes a hook for hanging a bag or a briefcase that fastens to a support, and a tray for writing supplies. Table has the function of manual installation of the top at an angle of 8°.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm with polymeric covering of grey color.

Sizes: 600*500 mm, the height according to 2, 3, 4, 5, 6, 7 groups of height (6 standard sizes)

Ağırlık: 10.7 kg

The table is with variable parameters for three height groups. The table has two lateral metal supports to which the horizontal table top and the vertical board (the element of rigidity) are fastened. The supports have variable vertical sizes. The kit includes a hook for hanging a bag or a briefcase that fastens to a support, and a tray for writing supplies.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm and 20*20 mm (in the places of adjustment) with polymeric covering of grey color.

Sizes: 600*500 mm, the height is adjusted according to 1-3 and 3-5 groups of height (for primary classes) or to 5-7 groups of height (for averages and the senior classes).

Ağırlık: 11.2 kg

This pupil’s table is intended for the equipment of one pupil’s workplace of the primary school student while standing. The table has the metal framework to which the top and the vertical board (the element of rigidity) are fastened. The top consists of two parts: horizontal and inclined (tilt angle - 17 degrees). There is a tray for writing supplies on the horizontal part. The metal framework is adjustable in height according to 2-4 growth groups and consists of two supports and a base. The base has polymer tips, wich do not allow scratching the floor.

Material of the top: laminated chipboard (the color – beech), 2 mm PVC edging.

Material of the front board: laminated chipboard (the color – beech), 0,3 mm melamine edging.

Material of the supports: metal pipe of square cross-section 25*25 mm and 20*20 mm (in the places of adjustment) with polymeric covering of grey color.

Sizes: 600*700*885/985/1085 mm, the height is adjusted according to 2-4 groups of height (for primary classes).

Ağırlık: 13.7 kg

Malzeme: 25*25 mm kare profil

Yüzey: Polimerik

Renk: gri

Ölçüler: İlk ve orta öğrenime uygundur.

Ağırlık: 2.6 kg

Malzeme: .25*25mm dış kare profil, 20*20 mm iç profil

Yüzey: Polimerik

Renk: gri

Ölçüler: İlk ve orta öğrenime uygundur.

Ağırlık: 2.9 kg

Malzeme: 25*25 mm kare profil

Yüzey: Polimerik

Renk: gri

Ölçüler: İlk ve orta öğrenime uygundur.

Ağırlık: 3.8 kg

Malzeme: .25*25mm dış kare profil, 20*20 mm iç profil

Yüzey: Polimerik

Renk: gri

Ölçüler: İlk ve orta öğrenime uygundur.

Ağırlık: 4.3 kg

It consists of a wooden seat, a back and a set of fasteners (6 bolts and 6 nuts, bolt length - as agreed). Note: in the repair set, every detail has only one single technological hole, about 3 mm in diameter.

Material: shaped plywood, varnished with transparent lacquer.

Seat size: 300*270*10 mm, 342*320*10 mm, 340*340*10 mm and 380*380*10 mm for pupil’s chair with (accordingly) 2, 3, 4, 5-6 groups of height.

Ağırlık: 1.4 kg

It consists of a wooden seat and a back. Note: in the repair set, every detail has only one single technological hole, about 3 mm in diameter.

Material: shaped plywood, varnished with transparent lacquer.

Seat size: 300*270*10 mm, 340*320*10 mm, 340*340*10 mm and 380*380*10 mm for pupil’s chair with (accordingly) 2, 3, 4, 5-6 groups of height.

Ağırlık: 1.3 kg